Swap an injected 4.0L, 5.2L or 5.9L engine into your Jeep
Comments and questions from our Readers
Ken / Danville, IL, UNITED STATES
Posted Jul 24 2007 05:44PM
I'm putting a 97 4.0L out of a Grand Cherokee into a TJ that had a 2.5L. I have the engine, trans., and trans. case transplanted from the Cherokee. I have the 4.0L engine harness and the 2.5L Chasis, Instr. etc harness. I'm having reak difficulties with the wiring. Color codes aren't the same as the manuals show. After wiring as instructed there's still wires left over, 3 of them are from the fuel pump and level senor??? Any help would be appreciated!
Clint / HOWE, TX, UNITED STATES
Posted Oct 25 2007 08:40PM
I am trying to do the same conversion and was wondering where the bracker for the CPS came from? Thanks
BIGDANJEEP /
Posted Jan 30 2008 02:49PM
I HAVE A 94 WRANGLER THAT I AM ATTEMPTING TO SHOE HORN A 5.2 GC MOTOR INTO...THE MOTOR IS IN AND EVERYTHING IS HOOKED UP WITH ONLY 1 MAJOR PROBLEM...WHEN I START THE MOTOR IT RUNS FOR 3 SECONDS AND SHUTS OFF...I AM PULLING MY HAIR OUT ON THIS ONE....WHAT DO I DO...I HAVE REALLY SOAKED ALOT OF DOUGH INTO THIS PROJECT
Tuner / Columbia, MO, UNITED STATES
Posted May 12 2008 07:28PM
Is there a template for cutting the CPS hole in the transmission bellhousing for a T999 and where can one purchase the support brace. I know that there are kits available to mount the CPS on the oilpan, but fabrication is part of any Jeep thing.
Michael / Oceanside, NY, UNITED STATES
Posted Aug 31 2008 08:41PM
I have a 94 jeep cherokee with 213000 miles. My tail lights and instrument cluster lights are not working. Ikeep replacing the fuse in slot 15 but it keeps on blowing. Where do I start looking for this problem? Any advice would be greatfully appreciated.
Tom Schefer / Hidden Valley Lake , CA, UNITED STATES
Posted Oct 18 2008 10:51PM
I have taken out the 2.5 four banger out of my 91 TJ I have installed the 4.0 and the AX15 out of another jeep a 98. I have installed the wiring harness from the other jeep but the one connector that was on the jeep that goes to the speedo and the nuteral safty switch does not mate up with the plug for the 4.0 Thus the fuel pump and the starter switch doec not work.
detroit, MI, UNITED STATES
Posted Nov 03 2008 01:35PM
is the in-cab wiring harness out of my 93 grand cherokee laredo 4.0 compatible with a 94 grand cherokee laredo 5.2, with a factory alarm?
todd / Danville, VA, UNITED STATES
Posted Nov 13 2008 07:48PM
I have a 94 Jeep Grand Cherokee Larado with 4.0L,automatic Trans. w/OD,4x4. The Jeep is totaled but i want to swap motor,transmission& transfer case into a wrangler or CJ . What year range Jeep do i need to look for to make the swap as easy as possible?
Dave / Bradenton, FL, UNITED STATES
Posted Dec 20 2008 11:49PM
I have a 97 wrangler with a 2.5. I have a 98 Grand Cherokee with a 5.9 as a donor... The truck was involved in an accident although the drive train was not injured.. The owner still has the cherokee and pulls it out of his garage every now and then..I'm looking to do a full swap.. engine,transfer case, transmision, computer everything.. Would this be the easiest swap and what whould I look for in the way of problems with the swap??? thanks
Posted Jul 24 2007 05:44PM
