can the BA10/5 be swapped in for the AX-5 in a 4 cylinder jeep yj? would you be able to do this just by changing the bell housing?
ryan1991yj / west valley, UT, UNITED STATES
Posted Feb 09 2009 11:28PM
what is the sensor mounted on the front of the AX-5 trans?
Chiri / Heredia, ZZ, COSTA RICA
Posted Mar 26 2009 11:37PM
UPSHIFT INDICATOR LIGHT On vehicles equipped with a manual transmission, ECU controls upshift indicator light. Indicator light is normally illuminated when ignition is turned on ithout engine running. Indicator light is turned off when engine is started. Indicator light will be illuminated during engine operation in response to engine load and speed. If transmission is not shifted, ECU will turn light off after 3 to 5 seconds. A switch located on transmission prevents indicator light from being illuminated when transmission is shifted to highest gear. Image from XJ: http://www.4x4extremo.com/socios/elopez/Jeep_Warning_Light.jpg
Posted Jan 05 2009 07:37PM